

The ME 0913 motor is a synchronous motor, type PMSM Brushless with a power of 12 kW. Warning, it is replaced by the engine ME1306!
Elec Shop Kit informs you that the ME 0913 engine is being replaced by the ME1306 engine.
The ME0913 motor have no brush maintenance.
Output Power of 12 KW Continuous, 30 KW Peak.
3-phase, Y-connected Permanent Magnet Synchronus Motor with an axial air gap.
The motor ME0913 is 92% efficient at voltages between 24 to 96 VDC.
This is a 4 pair of pole (8 magnets).
The Phase to Phase winding resistance is 0.013 Ohms.
The maximum recommended rotor speed is 5000 RPM.
Voltages from 0 to 96 VDC input to the control.
Torque constant of 0.15 Nm per Amp.
The Inductance Phase to Phase is 0.20 Milli-Henry.
Armature Inertia is 45 Kg Cm Squared.
Continuous current of 125 Amps AC (180 Amps DC into the motor control).
Peak current of 420 Amps AC for 1 minute (600 Amps DC into the motor control).
Weight of 35 pounds (15.9 kg).
Peak Stall Torque is 90 Nm.
This is an Open Frame, Fan Cooled motor.
Temperature sensor KTY84-130
U/V/W encoder
Data sheet
You will also like the following associated products: