ME1304 PMSM brushless motor
The ME 1304 motor is a brushless, water-cooled, water-cooled synchronous PMSM motor with a power output of 8.5 kW, a continuous voltage of 72 VDC and a rotation speed of 4000 RPM.
Kit Elec Shop offers you the motor ME1304
The ME1304 is a brushless motor, so no maintenance also called brushless PMSM.
Its output power is 14.5 kW continuous for a voltage of 96 VDC.
It is a three-phase motor with double stators. It is a synchronous motor with permanent magnets connected in Y with an axial gap.
The efficiency of the motor + controller assembly is 90% at a voltage of 72 VDC.
The ME1304 is a motor with 4 pairs of poles (8 magnets).
The winding resistance between two phases is 0.0063 ohms.
The winding inductance between two phases is 0.066 mH at 1 kHz.
The recommended maximum rotor speed is 5000 rpm.
The torque constant is 0.14125 Nm per ampere DC.
The inertia of the armature is 45 kg.cm2.
The permanent current is 180 amps AC.
The peak current is 450 amps AC for 2 minutes.
Its mass is 15.9 kg (without the coolant).
It has a KTY84-130 temperature sensor and a sin / cos position encoder.
For proper cooling, the recommended fluid flow rate is 6 liters per minute.
- Weight (kg) :
- Voltage (V) :
- 24-96 VDC
- Speed (RPM) :
- MAX speed (RPM) :
- TARIC or HS code:
- 85015230 MOT sup 7.5kW
- Made in China
You will also like the following associated products:
6mm steel support for MOTENERGY motors for kart chassis without roller
6mm steel support for MOTENERGY motors for kart chassis with roller
US 3/8 19mm screw pack for fixing MOTENERGY motors
Stainless steel MOTENERGY motor support for 132mm shaft height bench
MOTENERGY stainless steel motor mount for engine bench
SEVCON 48V 275A three-phase controller GEN4 4827 size 2 sin/cos
SEVCON three-phase controller GEN4 4845 48V 450A size 4 sin/cos
SEVCON three-phase controller GEN4 4865 48V 650A size 6 sin/cos
SEVCON three-phase controller GEN4 8018 size 2 sin/cos
SEVCON three-phase controller GEN4 8035 size 4 sin/cos promotion
- On sale!