Synchronous motor ME1716 PMSM brushless IP65 4kW sin-cos
€813.84
VAT included
€678.20 Tax excl.
The ME 1716 motor is a synchronous motor, type PMSM brushless, consuming 100A at a battery voltage of 48V. It is IP65.
Kit Elec Shop offers you the ME1716 motor.
Its nominal power is 4 kW for a nominal speed of 4000 rpm.
This ME 1716 motor is a brushless motor, so it doesn't need any maintenance, it is also called PMSM brushless.
It is a three-phase permanent magnet synchronous motor with axial air gap.
The ME1716 motor has an efficiency of 88% for DC voltages between 24V and 48V DC.
It is a 5-pole (10 magnets) motor.
The DC current is 100 amps for a voltage of 48V DC.
Its permanent output power is 4 kW at a voltage of 48 VDC.
The maximum rotor speed is 5500 rpm.
Its resistance between phases is 4.9 milli Ohms.
The inductance between phases measured at 1000 Hz is between 39 and 43.5 micro Henry.
Its mass is 9.3 kg.
It has a temperature sensor equivalent to the KTY84-130 and a sin/cos type position encoder.
This ME1716 motor is waterproof and is IP65.
Explanations of the terms CW (ClockWise): clockwise and CCW (Counter ClockWise): counterclockwise.
230-ME1716
Data sheet
- Height (mm) :
- 181.5
- Width (mm) :
- 181.5
- Length (mm) :
- 150
- Weight (kg) :
- 10.95
- Voltage (V) :
- 48V DC
- Current (A) :
- 100A DC
- Power (W) :
- 4000
- Speed (RPM) :
- 4000
- Torque (Nm) :
- 9.55
- Diameter (mm) :
- 7/8 inch shaft
- TARIC or HS code:
- 85015220 MOT inf 7.5kW
- Country:
- Made in China
You will also like the following associated products:
6mm steel support for MOTENERGY motors for kart chassis without roller
€226.92
-5%
€215.57
Tax incl. - €179.65 Tax excl.
- -5%
- Pack
6mm steel support for MOTENERGY motors for kart chassis with roller
€269.40
-5%
€255.93
Tax incl. - €213.28 Tax excl.
- -5%
- Pack
US 3/8 19mm screw pack for fixing MOTENERGY motors
€10.80
-5%
€10.26
Tax incl. - €8.55 Tax excl.
- -5%
- Pack
Stainless steel MOTENERGY motor support for 132mm shaft height bench
€66.00
Tax incl. - €55.00 Tax excl.
MOTENERGY stainless steel motor mount for engine bench
€48.00
Tax incl. - €40.00 Tax excl.
SEVCON three-phase controller GEN4 2430 size 2
€1,216.80
Tax incl. - €1,014.00 Tax excl.
SEVCON three-phase controller GEN4 2445 sin/cos size 4
€1,413.60
Tax incl. - €1,178.00 Tax excl.
SEVCON 48V 275A three-phase controller GEN4 4827 size 2 sin/cos
€1,056.24
Tax incl. - €880.20 Tax excl.
SEVCON three-phase controller GEN4 4845 48V 450A size 4 sin/cos
€1,344.00
Tax incl. - €1,120.00 Tax excl.
SEVCON three-phase controller GEN4 8018 size 2 sin/cos
€1,231.20
Tax incl. - €1,026.00 Tax excl.
SEVCON three-phase controller GEN4 8035 size 4 sin/cos promotion
€1,520.40
-50%
€760.20
Tax incl. - €633.50 Tax excl.
- On sale!
- -50%
Configuration and tests package for SEVCON controller
€132.00
Tax incl. - €110.00 Tax excl.
8 pins DELPHI male pack connector
€13.92
-2.5%
€13.57
Tax incl. - €11.31 Tax excl.
- -2.5%
- Pack
Synchronous motor ME1717 PMSM brushless IP65 4kW U-V-W
€813.84
Tax incl. - €678.20 Tax excl.
Synchronous motor ME1718 PMSM brushless IP65 6kW sin/cos
€1,099.80
Tax incl. - €916.50 Tax excl.
Synchronous motor ME1719 PMSM brushless IP65 6kW U/V/W
€1,099.80
-10%
€989.82
Tax incl. - €824.85 Tax excl.
- On sale!
- -10%
The ME 1716 motor is a synchronous motor, type PMSM brushless, consuming 100A at a battery voltage of 48V. It is IP65.