Synchronous motor ME4201 PMSM brushless
€566.54 VAT included
€566.54 Tax excl.
The ME 4201 motor is a synchronous motor, type PMSM brushless. It operates under 24V-72V and consumes 90A.
Kit Elec Shop offers you the motor ME 4201.
Full reference: ME0201014201
The ME4201 is a brushless motor, so no maintenance also called.
3-phase, Y-connected Permanent Magnet Synchronus Motor with an axial air gap
The motor ME4201 is 90% efficient at voltages between 24 to 72 VDC
Continuous current of 90 amps at 48 VDC
28 turns per phase Line to Line resistance of 0.025 ohms
This motor goes slower as compared to the ME0201013001 motor, with more torque per amp.
Weight of 22 pounds (10 kg)
No temperature sensor
- Weight (kg) :
- Voltage (V) :
- 24-72V DC
- Current (A) :
- 90A DC
- Diameter (mm) :
- 7/8 inch shaft
- TARIC or HS code:
- 85015220 MOT inf 7.5kW
- Made in China
You will also like the following associated products:
€12.50 Tax incl. - €12.50 Tax excl.
6mm steel support for MOTENERGY motors for kart chassis without roller
€187.99 -5% €178.59 Tax incl. - €178.59 Tax excl.
6mm steel support for MOTENERGY motors for kart chassis with roller
€224.28 -5% €213.06 Tax incl. - €213.06 Tax excl.
US 3/8 19mm screw pack for fixing MOTENERGY motors
€9.25 -5% €8.79 Tax incl. - €8.79 Tax excl.
Stainless steel MOTENERGY motor support for 132mm shaft height bench
€72.00 Tax incl. - €72.00 Tax excl.
MOTENERGY stainless steel motor mount for engine bench
€40.00 Tax incl. - €40.00 Tax excl.
SEVCON three-phase controller GEN4 4845 48V 450A size 4 sin/cos
€1,120.05 Tax incl. - €1,120.05 Tax excl.
SEVCON three-phase controller GEN4 4865 48V 650A size 6 sin/cos
€1,440.00 Tax incl. - €1,440.00 Tax excl.
SEVCON three-phase controller GEN4 8018 size 2 sin/cos
€1,026.00 Tax incl. - €1,026.00 Tax excl.
SEVCON three-phase controller GEN4 8035 size 4 sin/cos promotion
€1,267.00 -50% €633.50 Tax incl. - €633.50 Tax excl.
- On sale!
SEVCON three-phase controller GEN4 8055 sin/cos
€1,718.00 Tax incl. - €1,718.00 Tax excl.
Removable hub Taper Lock 1008 diameter 7/8 inch
€12.60 Tax incl. - €12.60 Tax excl.
Removable hub Taper Lock 1108 diameter 7/8 inch
€14.00 Tax incl. - €14.00 Tax excl.
Step Key 6.35mm and 4.76mm L35mm
€8.00 Tax incl. - €8.00 Tax excl.
U-V-W encoder hall effect sensor for MOTENERGY motors
€34.54 Tax incl. - €34.54 Tax excl.