The synchronous motor ME 1012, type PMSM brushless, is replaced by the motor ME1114.
Kit Elec Shop offers you the motor ME 1012.
The ME1012 is a brushless motor, so no maintenance called.
The motor ME1012 is 92% efficient at voltages between 24 to 72 VDC. Continuous current of 125 amps AC (180 Amps DC into the motor control).
The ME1012 is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap and 3 Hall sensors at 120 degrees electrical timing. It has two stators with a rotor in the center.
Output Power of 10 KW Continuous, 24 KW Peak (at 72 volts).
The ME1012 is a motor with 4 pairs of pole motor (8 magnets).
The Phase to Phase winding resistance is 0.065 Ohms with 20 turns per phase.
The maximum recommended rotor speed is 5000 RPM.
Voltages from 0 to 72 VDC input to the control.
Torque constant of 0.12 Nm per Amp.
The Inductance Phase to Phase is 0.05 Milli-Henry.
Armature Inertia is 45 Kg Cm Squared.
Continuous current of 125 Amps AC (180 Amps DC into the motor control).
Peak current of 420 Amps AC for 1 minute (600 Amps DC into the motor control).
Weight of 35 pounds.
Peak Stall Torque if 60 ft lb.
This is an Open Frame, Fan Cooled motor.
Includes temperature sensor and U/V/W encoder.
Data sheet
You will also like the following associated products:
The synchronous motor ME 1012, type PMSM brushless, is replaced by the motor ME1114.
