PMG132 DC motor PERM Motor second hand
The PMG 132 engine from PERM Motor GmbH is a brushed DC motor. It operates at voltages from 24V to 72V DC. It nominal current is 110 A. This is a second hand model.
Kit Elec Shop offers the second hand PMG 132 DC motor.
The brushes have 2 mm wear and the motor has been revised.
This PMG132 motor is a brushed permanent magnet DC motor.
The PMG 132 motor operates at 24 V to 72 V DC and 110 amperes continuously (peak current 210 amperes for 10 minutes).
Its permanent output power is 7.22kW at 72V continuous and 10kW for 1 minute.
The recommended maximum rotor rotation speed is 3000 rpm.
Its mass is about 12.5 kg.
It is an open frame engine.
210-PMG-132-b
Data sheet
- Height (mm) :
- 222
- Width (mm) :
- 222
- Length (mm) :
- 162.55
- Weight (kg) :
- 12.5
- Voltage (V) :
- 24 V-72V
- MAX voltage (V) :
- 72
- Current (A) :
- 110
- MAX current (A) :
- 200
- Power (W) :
- 2.50 kW - 7.22 kW
- Torque (Nm) :
- 20
- MAX Torque (Nm) :
- 38
- Diameter (mm) :
- shaft 19mm
- TARIC or HS code:
- 85013200 MOT 750W-75kW
You will also like the following associated products:
Pack of 8 trapezoidal carbon brushes for PMG132 motor
€119.04
-5%
€113.09
Tax incl. - €94.24 Tax excl.
- -5%
- Pack
Fixing support pack for PMG132 motor WITHOUT roller
€203.52
-5%
€193.34
Tax incl. - €161.12 Tax excl.
- -5%
- Pack
PMG132 motor mount package WITH roller
€249.54
-5%
€237.06
Tax incl. - €197.55 Tax excl.
- -5%
- Pack
6mm steel support for PMG132 motors for engine bench
€60.00
Tax incl. - €50.00 Tax excl.
Go-kart SEVCON Millipak 4Q controller 24V-48V 300A 633T43819
€1,064.40
Tax incl. - €887.00 Tax excl.
22 teeth HTD 8m 1008 Taper Lock Steel Pulley 30mm wide 22-8M-30-FTL
€18.36
Tax incl. - €15.30 Tax excl.
New brush holder with 8 brushes for DC motor PMG132
€506.40
Tax incl. - €422.00 Tax excl.
The PMG 132 engine from PERM Motor GmbH is a brushed DC motor. It operates at voltages from 24V to 72V DC. It nominal current is 110 A. This is a second hand model.